Sunday, March 22, 2015

Tweaking the HB9CV

Anneli disassembling old gamma rods
It was a beautiful day today, sun shining, birds singing. Though a little cold (6C) we decided to setup my daughters trampoline again. It went well with her help and so there was time left to play.....and tweaking my 10m HB9CV. With a little help of course...

The plan was to change the gammarods. The problem with 6mm2 wire is that it is not able to hold birds and so the antenna got detuned. Although the SWR was good enough and tunable with the antennatuner I was not really happy with it.

Anneli checking...
So I bought some 2m long 10mm diameter alu for the gammarods. I decided to use the complete length and fiddled a slider to connect it to the radiators. As the impedance was too low at the resonance frequency (R=37 X=8) I chose a point 10cm further at the radiator as resonance will be rising then. I was right, I got R=49 and X=1 excellent. But it was on 27.500 MHz. I shortened the radiators by cutting them all 5cm off the tips. Now the SWR is great were I want it. Bandwidth is better. R=45 X=5 is better as well but still not perfect.

HB9CV with new gammarods
Great results for a good hour tinkering. Of course a good SWR is relative. How is the antenna working? I heard a station from Brazil talking with a reasonable constant signal S7. Turned the antenna 180 degrees and he was S0-1, turned it back to Brazil and he was S7 again. So, front/back/side ratio is good. Of course I can't see the gain but I expect it at least 4dBd. Made some quick QSOs with PY2SBY, CE1OEB, PY2VI with reasonable reports. And without the help of the antennatuner now! Although propagation is not that good on 10m lately I'm ready to use it in the CQWW WPX contest next weekend.


SWR curve: yellow old situation - red new situation

When the antenna was back in the air, the tools returned in the garage and the test QSOs made it was time for a delicious diner made by my XYL. I'm a lucky guy....



8 comments:

Bert, PA1B said...

Hallo Bas, good SWR. FB. And most of all, the antenna is working well. Good luck in the CQ WW WPX contest. Anneli staat er leuk op. 73, Bert

Peter pa4o said...

Zo te zien is hij heel goed voor in de cw bandje.. Ga maar gauw cw leren...Gaat een nieuw wereld voor je open als je dat een beetje redelijk kunt..

Peter

Paul Stam PAØK said...

Hallo Bas, leuk dat je een goede hulp hebt. Mooi dat je antenne nu zo goed werkt. Ja, cw zou een wereld voor je openen en aan je voeten liggen. 73 Paul

PE4BAS, Bas said...

Bedankt voor de reactie Bert. Anneli heeft goed meegholpen. Ondertussen springen op de trampoline was ook leuk natuurlijk. Hoop dat de 10m nog weer wat meer open gaat komende week. 73, Bas

PE4BAS, Bas said...

Heb je goed gezien Peter. Ook prima voor digimode. CW leren ga ik ook zeker doen. Maar ben tot nu toe nog niet voldoende gemotiveerd. Het is net als Chinees leren. Als je in China bent wou je dat je het kon. 73, Bas

PE4BAS, Bas said...

De hulp was uitstekend. De HB9CV werkt nu zoals ik het wou hebben. Zonder condensator en toch goede SWR en wel zo breedbandig dat ik er evt. ook mee op 11m kan. CW ga ik zeker leren. Maar denk dat ik er toch wel een jaar voor uit moet trekken. Misschien dat ik het binnenkort toch weer eens ga proberen. 73, Bas

Hans said...

Hallo Bas, mijn complimenten maar je hebt de modificatie uitstekend opgelost. En het mooie is natuurlijk ook nog dat de SWR verbetert is en lekker breedbandig. Klasse man! Maar ja, wat wil je ook met zo'n hulpvaardige dochter. 73 Hans, PE1BVQ

PE4BAS, Bas said...

Hallo Hans, ik doe maar wat eigenlijk. Zou deze antenne wel eens uitgerekend willen zien in een programma als EZNEC. Beetje inspiratie heb ik van HPSD antenne's. Zeg maar het innovantenna van Nederland maar dan niet zo commercieel. Alleen wel professioneel. Dat kan je bij mij niet zeggen. Heel erg veel verstand heb ik er niet van. Maar ben tevreden met het resultaat. 73, Bas